|
|
|
Data
Collection
|
- Liaison
with Client for collection of data, drawings and information
as required for design and engineering of the project
- Provide technical specifications
and guidance for measurement/generation of site-specific
date through survey, geo-technical investigation, etc.
|
|
|
Basic
Engineering
|
- Review
analysis and collection of data and information to develop
basis for design engineering
- Preparation of plot plan showing
overall layout and relative disposition of various buildings,
structures, and service facilities
- Development of system design,
control philosophy, single line/flow diagrams and equipment
layouts based on the schemes and concepts reflected in the
Project Report
- Engineering studies to establish
design criteria, equipment capacities and system parameters
- Review of soil investigation
report to decide on type of foundations and preparation
of design basis for civil/structural/architectural work
|
|
|
Preliminary
Engineering
|
- Finalization
of plot plan with dimensions and coordinates
- Scrutiny and finalization of
technical parameters of major plant and equipment
- Review and approval of vendor’s
specification and data sheets, drawings of critical equipment
and engineering
- Detailed engineering supervision
and coordination with sub-contractor involving integration
of various inputs from the vendors
- Review of bar bending schedules
for RCC construction and shop fabrication drawings for steel
structures to be prepared by respective vendors
- Review and compilation of operation
manuals submitted by vendors. The manuals shall contain
consulting engineer’s system drawings and explanatory write-up
as required
- Supervision and coordination
for preparation of “AS-BUILT” drawings originally prepared
by consulting engineer and not superceded by vendor's drawings
based on feedback data and marked-up prints showing the
modification(s) carried out in the field
|
|
|
